How to Reduce the cost of Building Construction.Tips for Cost effective Building Construction. Areas from where cost can be minimized.

 

How to Reduce the cost of Building Construction. 

Every person has a dream to build his own house where he can enjoy his life with his family.

But it is not as easy for everyone as it becomes very expensive work for some of the middle class people now a day. That’s why people always want to search some idea to reduce the cost of construction.

Hence, here, I am going to share some important tips which can be beneficial in reducing the cost of the construction of your house.

 

(1)      Selection of Right Plot :

Always try to prefer road side plot. Because the transportation and the communication is easy and cheaper for the life time. Also we should try to select a plot which is even and at the road level. it reduces the cost of extra cutting and filling of land.

(2)      Do Soil Test:

In course of selecting plot we should also focused on the nature of the soil.

Soil is of different nature and hence, possesses different behavior. if the soil is not good or is very loose you will have to expense huge on foundation and so the cost of construction will increase.

(3)      Check Electrical and Water Supply in Area:

We should check the electrical and water supply in area where we are taking the plot. If there is no electric and water connection near your plot then you have to apply for a separate poll connection near your home and have to make a separate connection for plumbing, which is again expensive.

(4)      Selection of  Construction Materials:

While selecting construction material we should be very careful because they play a very important role in cost cutting. You should try to purchase the materials in lot and in bulk amount from a distributer. This way it can cost you cheaper as compare to buy them in small quantity from retailers.

(5)      Prepare Structural Drawings:

Preparing of structural drawing is very important for cost effective construction. Most of the people ignore the importance of structural drawing. They only think about the architectural drawing of the building but structural drawing is needed for foundation plan detail, framing plan detail, column and beam plan detail, and other structural components of buildings.

With the help of this structural drawing the amount of steel, sand, cement, aggregate and bricks will be calculated in advance. And if this is done correctly then there is a chance of saving lots of money.

(6)      Do not Make any Change in Construction Plan      Once it Starts:

At most of the construction sites it is seen that the construction of any project is going on as per the plan but suddenly they change their plan which is a major cause of the increase in the cost of the project.

(7)      Use Fly Ash In Place of Red Bricks:

If you really wish to reduce the cost of construction then you should use fly ash brick instead of red traditional brick. the fly ash brick is quit cheaper as compare to the red brick.

(8)      Buy Material from Local Vendors:

You should always try to purchase the construction material from the local vendors. this will reduce your transportation charges which is generally very expensive.

(9)      Saving in Labor Cost:

In total expense of a construction the labor cost is also a big part. This can be reduced if we approximately measure or calculate the amount of work to be done in hours by per labor. This way you can put an eye on the progress of the construction site.

(10)                 Saving in Flooring:

There are many types of flooring. it can be done in both ways, in expensive way also and in economically also. The tiles in market are available in a wide range of prices. We can select some of them as per our project cost. Cement flooring can also be a good choice which is cheaper and also long lasting.

Following are tips for Cost effective house development,

• Ø  Do Statistical surveying prior to purchasing Development Materials
• Ø  Plan Primary Drawings
• Ø  Saving in Completing Materials
• Ø  Try not to Make Change after Development Starts
• Ø  Go for Pre-manufacture Work
• Ø  Utilize Fly Debris Rather than Red Blocks
• Ø  Select Great Tone and Putter
• Ø  Purchase Material from Nearby Merchants
• Ø  Saving in Labor Cost
• Ø  Saving in Hardware Cost
• Ø  Saving in Ground surface
• Ø  Saving in Wooden Work
• Ø  Choosing Great State of House
• Ø  Diminish Quantities of Wall

Regions/Areas from where cost can be diminished are:

1- Reduce the plinth region by utilizing more slender wall idea.

2- Use locally accessible material a creative structure like soil concrete blocks instead of consumed block.

3- Use energy effectiveness materials which consume less energy like a substantial block instead of consumed block.

4- Use harmless to the ecosystem materials which subs for ordinary structure parts like use R.C.C. Entryway and window outlines instead of wooden edges.

5- Preplan each part of a house and support the plan methodology for decreasing the size of the part in the structure.

6- By arranging every single part of a house the wastage of materials because of the destruction of the spontaneous part of the house can be kept away from.

7-Every part of the house will be actually taken a look at whether on the off chance that it's fundamental on the off chance that it isn't required, then that part ought not to be utilized.

8-Assemble more intelligent with space. More modest house, multi-use spaces.

Management by structural architects ought to be compulsory at the hour of development